What to do if your machine shows "Down for Maintenance"
Unless otherwise notified, nightly maintenance occurs at 11:45PM Mountain Time (5:45AM UTC), and should last no longer than an hour.
If your machine is still showing the "Down for Maintenance" after that period, you can remove the message by resetting the mini-PC.
- Hold down the round button under the main power switch for 1-2 seconds until the white light goes out, then press it again.
Once the machine has been reset, you should be able to log into it again and use it as normal.
If the PhyzBatch is unresponsive (Sort/Maintenance commands can be clicked but nothing happens) flip the Main Switch off and on, and retry the command.