What to do if you can’t connect to your PhyzBatch or your browser is showing a “can’t reach this page” message.
First, please ensure that your PhyzBatch is plugged in and that the miniPC and the main power switch (PhyzBatch Switch) are on. You should see a solid red light above the main switch, and a white light on the miniPC Power Button.
Follow the troubleshooting steps in the Network Setup Guide to connect your PhyzBatch to your network over either a wired or wireless connection. Wired connections are preferred.
If you still can’t connect to the machine after performing the steps and troubleshooting in the Network Guide, please contact Support.