Skip to content
English
Go to tcgmachines.com
  • There are no suggestions because the search field is empty.

Error Message Index

A list of links to all error messages that can occur in the user UI for the PhyzBatch 9000 and their troubleshooting steps.

100 Failed to Connect to PhyzBatch Flip the main power switch off, then on.
101 Serial Connection Lost Flip the main power switch off, then on.
102 Conveyor Motor Disconnected Make sure conveyor plug connected to scanner.
103 Rapid Change in Conveyor Motor RPM Check for and remove any stuck cards and check for and replace stuck bearings.
104 Camera Blackout Flap the main power switch off, then on.  Check for blockage covering internal camera.
105 Camera Connection Lost  Flip the main power  switch off, then on.  
106 Camera Failed to Connect Flip the main power  switch off, then on.  
107 Camera Obstructed Run Regenerate Dock Photo, adjust as necessary and then run the command gain.
108 Double Feed Adjust your card sorter foot downwards and continue.
109 Entry Sensor Blocked Clean Feed Wheels, adjust foot up or down as required
110 Exit Sensor Blocked Check for Double Feed cards, check that the metal plate pushes the glass up against the foam rollers.
111 Position Rollers  Slipping Check that the metal plate pushes the glass up against the foam rollers.
112 Empty Hopper Clean the feed wheels. adjust foot height, check tail distance from feeder
113 Exit Sensor Failed to Trigger Check that the metal plate pushes the glass up against the foam rollers.
114 Entry Sensor Failed to Trigger Clean the feed wheels. adjust foot height, check tail distance from feeder
201 Invalid Sort ID Data mismatch.  End sort and start a new one.
204 Missing MTG card ID Run a software update for the latest card data.
205 Missing Pokémon card ID Run a software update for the latest card data.
206 Missing Lorcana card ID Run a software update for the latest card data.
207 Missing One Piece card ID Run a software update for the latest card data.
999 Unspecified error. Contact Support.