![Logo - 2021 FINAL 60px.png]](https://support.tcgmachines.com/hs-fs/hubfs/Logo%20-%202021%20FINAL%2060px.png?height=40&name=Logo%20-%202021%20FINAL%2060px.png){kind=small}
Troubleshooting
Getting an error? Check here.
- How to Replace the Weight Housing
- Replacing Feed Wheel Rubber
- There is No Sort Option
- Cards are Sorting to the Wrong Bin
- Gate Height Adjustment (3D-printed model)
- Gate Height Adjustment (Aluminium Model)
- Gate Height Adjustment (bushing model)
- Down for Maintenance
- Card Feeding and Troubleshooting Guide
- Piston Troubleshooting Guide
- How to Clear a Jam
- How to Adjust Flappers
- Can't Connect to PhyzBatch
- Replacing The M3 Motor Belt
- Replacing Your Gate Beams
- Replacing Conveyor Bearings
Error Messages
- Error - Failed to Connect to PhyzBatch Control Board.
- Error Message Index
- Error - Conveyor Motor Disconnected
- Error - Rapid Change in Conveyor Motor RPM.
- Error - Blacked-Out Images Taken.
- Error - Camera Connection Lost
- Error - Camera Failed to Connect
- Error - Camera Obstructed
- Error - Double Feed Occurred
- Error - Entry Sensor Blocked
- Error - Exit Sensor Blocked
- Error - Position Rollers Slipping
- Error - Refill Hopper
- Error - Exit Sensor Failed to Trigger
- Error - Entry Sensor Failed to Trigger
- Error - Database Failed to Connect
- Error - Invalid Sort ID